Imagine DQS6800+, Инструкция по установке и эксплуатации

Страница: 62 / 84

48 DQS6800
+
Installation and Operation Manual
Chapter 3: Operation
Module Status LEDs
DQS6800
+
modules do not have any card-edge alarms. Instead,
module status LEDs on the corner of the module light up if an error is
detected. See
Figure 3-1 on page 47 for the location of these LEDs, and
Table 3-9 for a definition of the LED colors.
Note
If the LED is flashing red, please contact your Customer Service
representative.
Alarms
If a major or minor alarm is triggered within your DQS6800
+
module,
the Module Status LED will flash.
Alarms are usually logged and monitored within available software
control applications (for example,
+
Pilot Lite or Pilot). You can only
differentiate between major and minor alarms within a software control
application. See the appropriate software control user manual or online
help for more information.
Table 3-9. Module Status LED Descriptions
LED Color Status Meaning
Off There is no power to the module; the module is not
operational.
Green There is power to the module; the module is
operating properly.
Red There is an alarm condition present (minor or
major).
Flashing The module has detected a hardware/firmware
fault.