Imagine communications OP+OER+HI+S, Инструкция по установке и эксплуатации

Страница: 32 / 51

18 OP
+
OER Installation and Operation Manual
Copyright © 2010, Harris Corporation
Chapter 2: Installation and Operation
Input Format [RO] Indicates the format of the incoming signal
• Unknown
• 270M
• 1.5G
• 3G
• Mismatch
Signal Strength [RO] Displays the optical input power strength String (dBm)
Product Information [RO] Displays the product name and wavelength String
*
When the card edge Remote jumper is open, the parameters Bitrate Select , and SD/HD Output are controlled by other card-edge
jumpers. In Auto, 270M, 1.5G, 3G, and Bypass, a closed jumper sets the reclocking mode. The module works in Auto mode if there is no
jumper installed. If multiple jumpers are installed, the priority from high to low is Bypass , Auto, 3G, 1.5G, and 270M . When the SD/HD
jumper is closed, the slew rate is set to SD (default).
** The Bypass option makes it possible to pass through an unsupported format without reclocking.
Table 2-4. OP
+
OER and OER+SF Parameters in CCS (Continued)
Parameter Name Function Options or Values