Imagine communications OP+OER+HI+S, Инструкция по установке и эксплуатации

Страница: 35 / 51

OP
+
OER Installation and Operation Manual 21
Copyright © 2010, Harris Corporation
Chapter 2: Installation and Operation
Alarms
Table 2-6 lists the alarms that are displayed in CCS-enabled control
panels and software. The card-edge module Status LED also turns red
when one of these alarms is activated.
Table 2-6. CCS Alarms
Alarm Name Severity Meaning
Input Not Present Major The module does not detect an input signal.
Reclocker Not Locked Major The reclocker cannot lock to the input signal.
Unsupported Format Minor The input rate is not supported by the software key version.
Input Power Too High Minor The optical input power is too high. This alarm is generated
when the input power is greater than the following:
• 0 dBm (OP
+
OER
+
S)
• +3 dBm (OP
+
OER
+
SF
+
D)
• -9 dBm (OP
+
OER
+
HI
+
S)
• -6 dBm (OP
+
OER
+
SF
+
HI
+
D)