Imagine communications DAC6800 plus BCA4, Инструкция по установке и эксплуатации

Страница: 42 / 59

DAC6800
+
BCA4 and DAC6800
+
BCA4Z Installation and Operation Manual 29
Chapter 3: Operation
• Valid bit received
• No Bi-phase error
• No parity error
• Audio is linear PCM
Module Status LEDs
The DAC6800
+
BCA4 and DAC6800
+
BCA4Z modules do not have
any card-edge alarms. Instead, module status LEDs on the corner of the
module light up if an error is detected. See
Figure 3-1 on page 28 for the
location of these LEDs, and Table 3-5 for a definition of the LED
colors.
Alarms are usually logged and monitored within available software
control applications (for example,
+
Pilot Lite or Pilot). See the
appropriate software control user manual or online help for more
information.
Note
If the LED is flashing red,
please contact your Customer
Service representative.
Table 3-5. Module Status LED Descriptions
LED Color Sequence Meaning
Off There is no power to the module; the module
is not operational.
Green There is power to the module; the module is
operating properly.
Red There is an alarm condition.
Flashing red The module has detected a hardware/
firmware fault.
Amber The module is undergoing configuration.