Imagine communications DAC6800 plus BCA4, Инструкция по установке и эксплуатации

Страница: 34 / 59

DAC6800
+
BCA4 and DAC6800
+
BCA4Z Installation and Operation Manual 21
Chapter 2: Installation
5. In the third field of the Device ID , enter
1.0.[slotnumber]
(Where, for example, 1.0.5 would refer to the module in slot 5 of
the frame.)
6. Close the window.
7. Double-click the device icon for the affected module.
The Configuration... box opens. On the File Transfer tab, the
/frame/slotx (where x is the slot number) directory appears in the
Select the device directory to transfer to: field.
8. Click Add .
9. In the Add Upgrade Files box, browse, select the module’s
upgrade package, and then click OK .
10. On the File Transfer tab, choose the file you wish to upgrade, and
then click OK .
11. Click Perform Transfer , and then click Yes .
This may take several minutes.
12. When the message File transfer to device succeeded appears in
the status bar, reboot the module by manually pulling it out and then
pushing it back into its slot in the frame.
You cannot click
Reboot Device to reboot 6800
+
modules that
must be upgraded in Boot Loader mode.
Your upgrade procedure is complete.
Note
You must delete unwanted files
in the
Add upgrade files for
transfer to device: field before
transferring the files. Otherwise,
the upgrading procedure will
fail.