Image Access Bookeye 4, Руководство по эксплуатации

Страница: 26 / 53

Page 26 Operation Manual
SLOW L1:
SLOW L2: Defines the speed when moving the lifting columns L1 and L2
up-/downwards while the light barrier detects them.
POS L1
POS L2 Shows the height of the lifting columns, measured from the
zero point
POS L3 Shows the opening height of the glass plate, measured from
the fully closed position.
INIT L1
INIT L2
Values from 10
… 300
Defines the height from the zero point for the lifting columns
after initialization.
INIT L3
Values from 1 … 999
Defines the opening height of the glass plate after a scan
sequence, when scanning in regular mode.
WEIGHT L1
WEIGHT L2 Shows the weight measured by the push button switches of
the left (L1) and right (L2) book cradle plate.
Maximum load: 45 kg / 99 lbs.
If the maximum load is overridden, the motor of the respective
lifting column will stop automatically. A red signal lights up on
the touchscreen.
OFFSET L1
OFFSET L2 Allows setting an offset for the maximum load which will be
lifted.
Note : Increase the offset value in small steps and check
the lifting columns for proper function.
There is a risk of destroying the glass plate if the
offset value is too high.
Min: 5
≈ 10 kg / 22 lbs.
Max: 30
≈ 30 kg / 66 lbs.
Increasing the offset value is recommended when documents
with heavy weights will be scanned.
V Scan L1
V Scan L2 Only if the book cradle plates are set in V-position!
Defines the height from the zero point for the lifting columns
when
VSCAN mode is selected.
V Scan L3 Only if the book cradle plates are set in V-position!
Defines the opening height of the glass plate when VSCAN
mode is selected.
The glass plate will be opened in VSCAN mode automatically
to the defined height.