ECODRILL 2000 CODE
Operating manual - English
24
8.5
Code cutting new keys
1) From the main menu select option: DEFINITION KEY
2) confirm with the Enter key to view the menu:
Enter cuts
–
Cut key
3) when “Enter cuts” is chosen the cutting codes (0-1-2-3...) with their measurements are shown (depth
expressed in hundredths of a millimetre in relation to the key rest). These values can be edited to
requirements.
4) after having completed this operation press ESC.
5) from the main menu select “Definition key”, press Enter, select “Cut key”, press Enter.
Use a template with suitable pitches, according to the type of key to be cut, and follow the order of
position and depth as when cutting by code.
8.6
Cutting Laser (sidewinder) type keys
Before activating the start switch (Q) lower lever (I) close to the keys and regulate the spring
system for laser (sidewinder) keys (ch. 7.5) with knob (O).
1) start the cutting operation by activating switch (Q).
2) lower the spindle, cut the key and stop at the beginning of the cut (fig.18) (fig. 19).
•
secure the spindle at this height by turning the lever (I) clockwise.
•
carry out the cuts using only the left-hand lever (C).
Fig. 18
Fig. 19
E
E1
®
®
bar
®
