23
8.
Do not force the workpiece through the machine. Let the machine apply the correct automatic
feed rate.
9.
Keep the feed rollers free of wood chips and sawdust. If the movement becomes clogged, kick-
back can occur.
10.
To ensure safe operation, inspect the feed speed spindles whenever you think it is necessary.
11.
The machine is designed for planing of wood only.
12.
Do not use the machine for planing wood with numerous knots or loose knots.
13.
Do not stand directly in front of the machine during operation, stand to one side.
14.
Check that the blades are fitted correctly before commencing operation.
15.
Take care when handling blades and the cutter head. Wear work gloves. The blades are sharp
and can easily cut bare hands.
16.
Allow the machine to reach full speed before feeding in a workpiece.
17.
Check that the cutters are securely fastened.
18.
Check the amount of cut on the blade before feeding in a workpiece.
19.
Never attempt a heavy cut in short stock.
20.
Avoid cutting across the grain.
21.
Missing push stick may lead to hazards. Use the push stick or push pads that keep your hand
well away from the blades, particularly for shorter stick planing. Do not attempt to plane too
short workpieces. Put the push stick back to the hooks on the side housing when not in use.
22.
Advance the material to the cutting head for normal operation by sliding it along the table, never
by placing it directly on the cutting head.
23.
Never leave the machine set to a heavy cut, but reduce it to a minimum cut.
24.
Use cutting blades designed for this machine only.
25.
Rectify the faults including guards and cutter block immediately as soon as they are discovered.
Wear hearing protectors to reduce the risk of induced hearing loss.
Wear safety goggles to prevent eye injuries by flying particles.
Wear a breathing mask to reduce the risk of inhalation of harmful dust.
Always use a dust extractor unit or a dust collector to prevent the machine from clogging.
UNPACKING AND CHECKING THE CONTENT
c
Double-ended dust adaptor 100 mm
1 pc
d
Dust extraction port
1 pc
e
Knife guard
1 pc
f
Guide fence unit
1 pc
g
Hand crank
1 pc
h
Blade set block
1 pc
i
Open-ended spanner
1 pc
j
Allen key
1 pc
k
Push block
1 pc
Содержание XW034
