Ikegami OCP-100, Руководство по эксплуатации

Страница: 24 / 46

3.3 Auto Setup
Auto setup is the function of automatically adjusting the level with the CPU inside the camera head. The following table shows the
auto setup functions adjusted by different processes.
Auto Setup Function
Control Item OCP
QUICK AWB ABB
REF EXT EXT EXT
LEVEL
BLK SET
R, G, B R, G, B
PED R, G, B R, G, B
GAIN R, G,B R, B
GAMMA R, G, B
FLARE R, G, B
WHITE CLIP R, G, B
AUTO KNEE
SLOPE
R, G, B
POINT R, G, B
MANU KNEE
SLOPE
R, G, B
POINT R, G, B
BLACK SHADE
H SAW
R, G, B (See Note 3.)
H PARA R, G, B
(See Note 3.)
V SAW R, G, B (See Note 3.)
V PARA R, G, B (See Note 3.)
Notes:
1 Available Auto Setup process depend on camera model.
2 REF EXT is the External Reference and is set by the reference setting function.
3 Executed only when the QUICK switch is pressed as well.
4 Set the Gch to the 100% level using IRIS.
●
QUICK Auto Setup
No charts are required because of the use of the built-in electrical test signals. Even if charts cannot be shot, the camera can be set
up. As the quick auto setup is performed using the CAL pulse, it does not include the adjustment of circuits before the insertion of
the CAL pulse.
●
Auto White Balance (AWB)
Used to adjust the white balance. Perform as required during operation.
●
Auto Black Balance (ABB)
Used to adjust the R, G, B black balance. Perform as required during operation. Auto setup is converged to the reference fi le values.
At shipment, this reference
fi
le values are created in the memory. To change the reference
fi
le values, refer to the MCP operation
instruction.
3-4 3. OPERATION
OCP-100 OCP-100 1209 VOL1 (U) (E)