Ikegami OCP-100, Руководство по эксплуатации

Страница: 13 / 46

- VR CLR switch
This clears setting values of all items and resets them to the reference value. Clearing is carried out by a long press of the
VR CLR switch.
- Item to clear “R/G/B/M FLARE” “R/G/B/M PED” “R/B/TOTAL GAIN”
“KNEE POINT/TOTAL” “AUTO KNEE POINT/TOTAL”
“MASTER GAMMA” “COLOR SAT” “VAR CTEMP”
When R/B GAIN is cleared, the existing VAR C. TEMP ON/OFF setting is also cleared.
- LOCK switch
Use to lock each control (DTL/SKIN, C.SAT/GAMMA, KNEE PT/SLOPE, R GAIN, G GAIN, B GAIN, R BLACK, G
BLACK and B BLACK) in the VR control area. When the LOCK switch lamp is on, you cannot operate these controls.
- R/G/B/M GAIN control
Used to control the gain of R, G, and B channels. Controlling the G gain will not change the actual video signal level of
G channel, but the levels of R and B channels change relatively. This is to prevent the change of camera sensitivity setting
caused by the change of the G channel.
- R/G/B BLACK control
Used to control the pedestal or fl are of R, G, and B channels. Use the PED FLARE switch to select between pedestal and
fl are. If the fl are control is selected, the MASTER FLARE indicator lights when the OCP is connected to a camera which
supports MASTER FLARE, indicating the MASTER FLARE control is active.
- PED FLARE switch
Used to select between pedestal and fl are for the R/G/B BLACK control.
13 IRIS indicator
Displays the F value of the lens. The F value is not displayed (“---” is displayed) when F16 is exceeded to CLOSE.
14 AUTO IRIS switch
Used to set the AUTO IRIS mode.
15 JOYSTICK
- IRIS control and M-PED control
Controls the IRIS of the lens and the master pedestal. In AUTO IRIS mode, the iris is controlled with ±1 stop range.
1. NAME and FUNCTION 1-5
OCP-100 1209 VOL1 (U) (E) OCP-100