13
•
Phase :
This is to adjust a sampling point of an input signal and may be
necessary to make it clear when edges are not clear when you
feed signals with characters or letters, or need to display fine
charts or drawings.
This works only with a component or PC.
•
SAVE :
This is to memorize the selected parameters. If you do not SAVE
the changes,the setting goes back to the conditions active prior
to making changes.
Note :Variable range of H.Position and V.Position when PAL or SDI signals are fed ;
Also please note that the screen size can not be changed, when the clear mode is
on.
H.Position
V.Position
PAL
-17 to + 17
-16 to +16
SDI
-50 to + 50
-10 to +10
5-7. Image Setting Screen
This is to adjust composite and Y/C Video Signals.
Controls for brightness and Contrast are possible with all kinds of input signals.
Screen Display
EXIT
MODE DISPLAY CONTROL IMAGE
COLOR
RESET
EXIT
Contrast
Brightness
Hue
Chroma
Blue Only
Filter Select
Edge Enhancer
Back Light
IP Mode
SAVE
0 - 128
-127 - 127
-127 - 127
0 - 255
OFF/ON
3D/2D
0 - 63
0 - 255
Still/Motion
（NTSC Video only）
（NTSC/PAL only）
（NTSC Video only）
（NTSC Video only）
•
Contrast:
This is to adjust the contrast, that is to control white level of
signals. (+)makes it brighter and (-) makes it darker.
•
Brightness:
This is to adjust the brightness, that is to control black level
of signals, (+) make it brighter, and (-) makes it darker.
•
Hue:
This is to adjust colour phase, Hue.
