10
5-5. MODE Screen
This menu is used to preset colors, select the component signal, lock the front
keys, switch the aspect ratio, readjust the VIDEO/S-VIDEO setup level, and
make the power-save setting.
Screen Display
EXIT
MODE DISPLAY CONTROL IMAGE
COLOR
RESET
EXIT
Color Preset
: 000 - 005
Component Select
: RGB/YPbPr
Front Key Lock
: ON/OFF
HD Aspect Ratio
: 4 : 3
Video/S-Video Setup : 0/Mid/Hi
Back light
: ON/OFF
H. Frequency
: 15.734KHz
V. Frequency
: 59.94Hz
SAVE
•
Color Preset:
The setting comes in six levels from 000 to 005. The 000 setting is a default
that cannot be modified. The other five levels include video line, compo-
nent, PC, DVI-independent RGB offset, RGB gain, hue and chroma. The
color temperatures 6500º and 9300º are fixed.
The initial value for the presets 001 thru 005 is 6500º.
(Individually presettable for the video line, component, PC, DVI, and SDI)
•
Component Select:
This is to select RGB or component Y. Pb. Pr. for RGB input such as BNC,
PC HD or DVI-D inputs.
•
Front Key Lock :
This makes the front panel control inoperative. By switching this ON, all
control via the front is deactivated.
To exit from the lock condition, and reactivate control ON press the (+) and
(-) keys at the same time.
(Power switch on the front panel not locked)
•
HD Aspect Raito:
To select a aspect ratio of the HD signal.
HD Aspect Ratio of the picture on a screen can be changed in 4 by 3 or 16 by
9.
For details, refer to the
6-5. Scanning Switch
.
