7
5. Operation
5-1. Input Selection and Controls
There are 6 keys on the front panel. Those are, (from left to right), Power, Input
select key and a Menu/Set key, Plus(+) key and Minus (-) key and a front power
switch and power indication LED on far right.
LED
POWER
INPUT SELECT
MENU/SET
OSD Control
−
＋
POWER :
POWER ON/OFF
INPUT SELECT :
Used to select input signals.
MENU/SET :
This is for a direct selection of Colour Pre-set, and when it is pressed for a long
period, it works to display the OSD Menu.
Minus (-) Key :
Normally for Brightness control and it works as a direct set control for (-), when
selecting setup menu selection.
Plus (+) Key :
Normally for Contrast control and it works as a direct set control for (+),when
selecting setup menu.
Note. INPUT SELECT: Used to select input signals. The signals VBS, Y/C,
COMPONENT, PC and DVI are selected in this order. (Each press en-
ables to switch to the following type of signal.)
5-2. Display Symbols
VIDEO
:
“VIDEO”
S-VIDEO
:
“S-VIDEO”
COMPONENT :
“COMPONENT”
PC
:
“PC”
DVI
:
“DVI”
No Signal
:
“NO SIGNAL”
