Ikegami MKC-X800, Руководство пользователя, Страница: 9 / 91

9
Guidelines and manufacturer's declaration - electromagnetic emissions
The Model MKC-X800 is intended for use in the electromagnetic environment specified
below. The customer or user of the Model MKC-X800 should confirm that the environment
is in compliance.
Immunity test
IEC 60601 test
level
Compliance
level
Electromagnetic environment
conditions
Conducted RF
IEC61000-4-6
Radiated RF
IEC61000-4-3
IEC61000-4-6
3Vrms
150kHz to 80Mhz
6Vrms
ISM Band
IEC61000-4-3
3V/m
80MHz TO 2.7GHz IEC61000-4-6
3Vrms
150kHz to
80Mhz
6Vrms
ISM Band
IEC61000-4-3
3V/m
80MHz TO
2.7GHz Portable and mobile RF
communications should not be used
in close proximity to any part of the
MODEL MKC-X800, including cables,
and should be kept at the
recommended separation distance
calculated from the equation
according to the transmitter
frequency.
Recommended separation distance
d=1.2√P
d=1.2√P 80～ 800 MHz
d=1.2√P 800 MHz～ 2.5 GHz
where P is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer
specifications, d is the
recommended separation distance
in meters(m).
Field strength is from fixed RF
transmitters, as determined by an
electromagnetic site survey*
a
should
be less than the compliance level at
each frequency range*
b
.
Interference may occur near
equipment marked with the
following symbol:
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects, and people.
,