Ikegami MKC-X800, Руководство пользователя, Страница: 4 / 91

4
When an abnormality is detected
If abnormal conditions, include smoke, a
strange odor or noise are observed,
immediately turn off the power and unplug
the power plug.
Continued use may result in a fire and/or electric
shock. Confirm there is no more smoke, and
contact to the sales representative.
If water or foreign matter gets inside, turn off
the power and unplug the power plug.
Continued use may result in fire and/or electric
shock. Please contact to the dealer or sales
representative.
If the device is dropped or the case is
damaged, turn off the power and unplug the
power plug.
Continued use may result in fire and/or electric
shock. Please contact to the dealer or sales
representative.
If the device is failed, turn off the power
switch and unplug the power plug.
Continued use may result in fire and/or electric
shock. Please contact to the dealer or sales
representative.
Do not use a damaged power cord (exposed
core or broken wire)!
Continued use may result in fire and/or electric
shock. Please contact to the dealer or sales
representative.
CAUTION
During Use
Do not put heavy objects on top of the
device!
These may tip over or fall off, resulting in injury.
Do not stand or sit on the device or the
carrying case!
These may break or tip over, resulting in injury.
When moving the device, turn off the
power, unplug the power plug, and
disconnect any cables between devices.
Not doing so may damage the power cord or
cables, resulting in fire and/or electric shock.
After use, be sure to turn off the power,
and then unplug the power plug.
Not doing so may result in damage, fire and/or
electric shock.
If the device will not used for a long
time, be sure to unplug the power plug
from a power outlet for safety.
Not doing so may result in fire.
During installation
Do not block the vent of this device!
If the vent is blocked, heat may build up inside
and cause a fire. Observe the following points.
・ Do not place this device face up, on its side, or
upside down.
・ Do not place this device into a poorly ventilated
small space.
・ Do not place the device on a carpet, etc.
・ Do not cover the device with a tablecloth, etc.
Do not place the device in a location with
poor power supply access.
To do so may damage the cord, and cause a
fire.
Install the device in a location where it does
not hinder disconnecting the cord.
When the camera head is attached to the
adapter and microscope, pay attention to the
following points. If not securely attached, it
may fall off during use, resulting in injury or
death.
・ Securely screw the camera head to the C-
mount ring of the adapter.
・ When attaching the adapter to the beam
splitter of microscope, be sure that the
accompanying tightening ring or
accompanying adapter tightening ring is
securely tightened.
・ Check the connection, make sure it is not
loose before using the device.
Instructions for Proper Use
During Use
・ If this device is used in a wet location, be sure
water does not get inside the device or cable,
etc.
This may result in electric shock.
・ If you hear thunder, consider the environmental
conditions before use. If needed, discontinue use
and do not touch the device.
This may result in electric shock.
・ Do not connect the device to a power
supply(W) exceeding that of the AC outlet.
Refer to the power rating indicated on the AC outlet
peripheral area, user manual, operation manual, etc.
・ Do not forcefully bend (twist or pull) the power
cord and connection cable during use.
This may tear the coating on the cord or cables causing
electric shock.
・ Contact the sales representative for replacement
parts (power cable).
If needed, replace the power cable with the same
or equivalent product. If the supplied power cable