Ikegami MKC-X800, Руководство пользователя, Страница: 24 / 91

24
Checking the Camera Image
1. Turn on the camera and other connected devices.
2. Turn on the microscope and lighting.
3. Check image output on the monitor.
3.3.1 Checking and Adjusting the Camera Image
1. To automatically adjust the camera image, press the White Balance button on the accessory chart.
2. Check if a normal image (appropriate brightness, color, resolution, etc.) is output.
For further details and adjustment methods, refer to "3.4 Touch panel operation".
Notes when Moving the Device
When moving the main unit, be sure to turn off the main power supply, unplug the power plug, and remove
the connection cable between the devices.
Notes when Connecting or Disconnecting the Camera Cable
When connecting or disconnecting the camera cable connecting the camera head and CCU, be sure to turn
off the power of the main unit.
Connecting or disconnecting the camera cable while the power of the main unit is on may cause a
malfunction.
Notes on the Camera Image
This device uses a CMOS sensor. As a result, the following phenomena may be observed. These are not
malfunctions.
1)
Bright spots may appear on the image when sensitivity is increased or the device is used at high
temperatures.
2) Flickering and horizontal lines appear on the screen under the lighting of discharge tubes, including
fluorescent lights, etc. Set the electronic shutter to 1/100 in the power supply frequency of 50Hz range.
3) Some distortion may occur on the screen for fast-moving objects.