Ikegami MKC-X800 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 91

Ikegami MKC-X800 Скачать руководство пользователя страница 5

5

is damaged, contact the sales representatives for
replacement.

During installation

・

Avoid areas with high humidity and dust, as well as

areas where oily smoke or steam may blow directly
onto the device.

Not doing so may result in electric shock. Do not place

the device on the kitchen counter or near a humidifier.

・

Secure the device to prevent it from falling over in

the event of an earthquake, impact, etc.

An unsecured device may fall down and cause injury.

Avoid falls to maintain safety.

Camera cable

Cleaning

・

For safety, turn off the power and remove the power plug

before cleaning. This may result in electric shock.

・

Wipe lightly the enclosure and panel with a dry soft

cloth.

・

"Regular inspections" are recommended to maintain

stable performance for a long time. Consult with sales
representative to schedule regular inspections.

・

This device contains high voltage component.

Consequently, inspection, maintenance and repairs
should be performed by a professional. Handling by a
person without proper knowledge may result in electric
shock.

Inspections

Regular inspections are recommended for the safe
use of this device.

Maintenance and inspection by users (daily

inspection)

1. Visual inspection

(1)

Check the exterior

・

Check for any abnormalities including damage and

wear on the exterior of the device and cable.

(2)

Check for cleanliness

・

Be sure the device is clean.

・

Be sure there are no body fluids, blood, waste

material, contrast medium, etc. on the device.

(3)

Check the surroundings

・

Be sure there are no objects which may hinder device

operation.

2. Function check

(1)

Check the condition of the device

・

Be sure the device is operating normally.

・

Check for any unusual noises or odor.

(2)

Be sure the device is securely attached.

・

If the camera head is attached to a rotating platform, etc.,

clamp the camera cable so excessive force is not applied to

the cable when moving. Be sure not to kink (twist, bend) the

cable. If the cable is distorted, the wire rod inside the cable

may break.

・

Before use, check for damage or deterioration of the cable and

lacing material.

Camera head

Radius of 75mm
or more

Connect
or

Radius of 75mm
or more

Camera cable

Pay attention to the following points.

・

Always use the supplied camera cable.
Connecting the wrong camera cable may damage the device.

・

When removing the camera cable from the camera head or

CCU, do not pull the cable. Grasp the connector (plug) to
remove.

・

Do not crush the cable.

・

Do not insert or remove the camera cable while the power is

on.

・

The acceptable bending radius of the camera cable is

approximately 10 times of the external radius of the cable
(75mm for φ7.5mm cable). Do not forcefully bend the cable in
excess of this radius. If the cable is forcefully bent, the wire rod
inside the cable may break.

«
...
3
4
5
6
7
...
»

Содержание MKC-X800




























































































Отзывы:

Нет отзывов