Ikegami MKC-230HD, Руководство по эксплуатации

Страница: 12 / 50

11
5. AC inlet
The power cable included with a commercial power (100 to 240 VAC) is connected here.
6. Main power switch
This is a main power switch.
7. DVI-D Output connector
Connects with DVI-D input monitor, etc. A DVI-D cable (optional) is required for
connection.
8. HD-SDI Output connector (2 lines)
Connects with HD-SDI input monitor, etc. The same imege is outputted to 2 lines.
When connecting use a coaxial cable with a cha UDFWHULVWLFLPSHGDQFHRI2KPV
9. GEN LOCK connector
When using while synchronized with the phase of another system’s image, inputs
synchronizing signals from the other system. Equivalent to
Tri-Level SYNC
(HD).
10. SYNC connector
When using while synchronized with the phase of another system’s image, outputs
synchronizing signals to the other system. Equivalent to Tri-Level SYNC (HD)
* This connector can be used only in synchronization for other MKC-230HD. We cannot
guarantee the synchronization with our competitor’s product.
11. Equipotential terminal
This is used to make the potential of a cabinet equal to other equipment.
12. Options
It is possible to mount the two types of optional modules listed below.
• IP ENCODER module
• DVI module
13. ETHERNET connector (RJ45)
Can be used with Ethernet 10Base-T/100Base-TX.
For connection with other devices, please connect a cable of category 5 or higher.