Ikegami MKC-230HD страница 2 Скачать руководство пользователя

Страница: 2 / 50

Safety Precautions

For Safe and correct usage

Thoroughly read the “Safety Precautions” and the

operation manual before using the unit. Keep them

carefully after reading and use as ready reference.

Pictorial Symbols

The “Safety Precautions” and markings on the product

contain various pictorial symbols to assure the safety

use of the product and prevent an injury to you and

other persons as well as property damage.

As each symbol has the following meanings,

thoroughly under- stand them before using the unit.

Please note that some precautions may not be

applicable to the product that you purchased

WARNING:

Indicates a potentially hazardous

situation that may arise due to improper

handling by taking no notice of this

symbol and could result in a serious

injury or death.

CAUTION:

Indicates a potentially hazardous
situation that may arise due to improper
handling by taking no notice of this
symbol and could result in an injury or
property damage only.

(Note) : This symbol attracts your attention.

Examples of symbols

Symbol “ ” means a prohibited action.

The content of prohibited matter is

mentioned near or in the figure. (The figure

on the left side represents “Caution for

disassembling”.

Symbol “ ” means a mandatory or directive
content. Practical precautions are shown in
the figure. (The figure on the left side
represents “Pull out power plug from plug
outlet.”)

The meanings of this mark are as follows.

Attention

ࠊ

consuit ACCOMPANYING

DOCUMENTS

This mark is a symbol that represents the

connection to the power supply

” This mark is a symbol that represents the

disconnection to the power supply

WARNING

When using the unit:

Do not place a receptacle containing water or a

ssmall metallic piece on the unit!

If water spills in the unit, a fire or electric shock

may be caused.

Do not use other power supply voltage than

sspecified!

A fire or electric shock may be caused.

Do not put a metal body or flammable material into

tthe opening of the unit!

Do not drop in such material!

A fire or electric shock may be caused.

Do not make alterations to the unit!

A fire or electric shock may be caused.

When installing the unit:

Do not set the unit in an unstable place!

It may drop or turn down, causing an injury.

Do not connect to any other equipment than

sspecified!

A fire or electric shock may be caused.

When it is installed, pleease contact the dealer or

salesman.!

When fixing the unit, do so in accordance with the

specified procedure; otherwise it may drop or

turn down, causing a fire, electric shock or

injury.

Especially when fixing it to the wall or ceiling,

be sure to ask the dealer or salesman.

When an abnormal state occurs:

If the unit produces smoke, gives out a foul

ssmell or produces an abnormal sound, turn off

the power switch immediately and pull out the

power plug!

If the unit is used as it is, a fire or electric

shock may be caused. Check that no smoke is

produced, and then contact the dealer or sales

representative.

If water or foreign matter enters the unit, turn

ooff the power switch and pull out the power

plug!

If the unit is used as it is, a fire or electric

shock may be caused. Check that no smoke is

produced, and then contact the dealer or sales

representative.

If the unit is dropped or the case is broken, turn

ooff the power switch and pull out the power

plug!

If the unit is used as it is, a fire or electric

shock may be caused. Contact the dealer or

sales representative.

If the unit fails to operate properly, turn off the

power switch and pull out the power plug!

If the unit is used as it is, a fire or electric

shock may be caused. Contact the dealer or

sales representative.

Do not use any damaged power cord (exposed

core, broken wire, etc.)!

If the unit is used as it is, a fire or electric

shock may be caused. Contact the dealer or

sales representative.

Содержание MKC-230HD


















































Результаты поиска

Содержание MKC-230HD

Отзывы:

Похожие инструкции для MKC-230HD

Бренды по названию

Популярные бренды

Ikegami MKC-230HD, Руководство по эксплуатации

Результаты поиска

Содержание MKC-230HD

Отзывы:

Похожие инструкции для MKC-230HD

Бренды по названию

Популярные бренды