8
1.3. Rear Panel of Camera Control Unit (CCU)
RS-232C
VBS
Y/C
DVI
FOOT SW
SYNC
POWER
GENLOCK
1
2
HD SDI
IRIS
CAMERA
1
VBS Output
Connector
7
DVI-D Output
Connector
8
HD-SDI Output
Connector
9
GEN LOCK
Connector
10
SYNC
Connector
11
POWER
Connector
12
Cable
Holder
2
S-VIDEO OUT
Connector
3
RS-232C
Connector
4
FOOT Switch
Connector
5
IRIS
Connector
6
Camera
Connector
13
Options
1
VBS Output Connector (SD)
Connects with VBS input monitor, etc. A VIDEO cable (optional) is required for connection.
2
S-VIDEO Output Connector (SD)
Connects with S-VIDEO input monitor, etc. An S-VIDEO cable (optional) is required for connection.
3
RS-232C Connector
Connects with PC unit, etc. A cross cable is required for connection.
4
FOOT Switch Connector
To connect the FOOT SW (option) cable extension from the foot switch.
5
IRIS Connector
Connects the IRIS cable of a special microscope adapter.
6
Camera Connector
Connects with camera connector of the special camera cable.
Be aware that the size of the camera connector differs on the camera head side and CCU side.
7
DVI-D Output Connector
Connects with DVI-D input monitor, etc. A DVI-D cable (optional) is required for connection.
8
HD-SDI Output Connector (2 Lines)
Connects with HD-SDI input monitor, etc. The same image is input in two 2 lines.
When connecting use a coaxial cable with a characteristic impedance of 75 Ohms.
9
GEN LOCK Connector
When using while synchronized with the phase of another system’s image, inputs synchronizing signals from
the other system. Equivalent to Three-Phase Synchronization (HD).
10
SYNC Connector
When using while synchronized with the phase of another system’s image, outputs synchronizing signals
from the other system. Equivalent to Three-Phase Synchronization (HD)
.
