23
3.5. Video Setting
Sets the video signal.
Video Setting
Quit
Format 59.94Hz
DVI Setting 1080p
Gamma ON
Master Gamma 0
Color Saturation ON
Color Saturation Gain 0
Genlock H Phase 0
Genlock V Phase 0
Item
Setting Value
Description
Format
Selects the output signals HD SDI, DVI, VBS and Y/C. (Not
possible to change them individually). With VBS output, the
signal method is also changed.
59.94Hz Output at 59.94 Hz. VBS is output with the NTSC method.
50Hz Output at 50 Hz. VBS is output with the PAL method.
DVI Setting
Select the DVI output signal output format.
1080p Output the progressive signal.
1080i Output the interlace signal.
Gamma
If gamma correction is carried out, it is possible to cause the
caused the dark sections of the image to be displayed brightly.
Normally this is used in an ON setting.
ON Carries out gamma correction.
OFF Does not carry out gamma correction.
Master Gamma
Adjusts the degree of gamma correction. With a setting value
of 0, the value is
Ȗ
= 0.45.
-128 to 127 The lower the value, the brighter the dark parts of the image
become.
Color Saturation
Sets the color intensity.
ON Adjusts the intensity of color set with Color Saturation Gain.
OFF Does not adjust the color intensity (normal color image).
Color Saturation
Gain
Adjusts the color intensity.
-64 to 63 The higher the value, the more intense the color. The lower
the value the more faded the color. With -64 it is monochrome.
Genlock H Phase
-128 to 127 Adjusts the horizontal phase for Genlock input.
*1
Genlock V Phase
-128 to 127 Adjusts the vertical phase for Genlock input.
*1
*1 For details, see Section 4.1 "External synchronization".
