Ikegami IPD-DM11, Инструкция по эксплуатации

Страница: 16 / 36

11
6. Connections
Be sure not to apply power before making connections.
6-1. Power cable
Use DC12V (10.5V to 15V).
* This installation should be made by a qualifi ed service person and should
conform to all local codes.
6-2. Image output cable (RJ-45)
This is output terminal for image signal. Use this cable by connecting with
PC, digital recorder, PoE HUB, etc.
Use a LAN cable more than Cat 5e when using this cable in PoE mode.
6-3. Test monitor output (MONI.OUT)
Image output terminal used when installing the camera.
6-4. AUDIO in/output
This is in/output terminal for audio. This is compatible with microphone
input,
line output and stereo.
6-5. DIGITAL IO
This is digital IO terminal.
DIGITAL IN is no-voltage contact point.
DIGITAL OUT is open or short circuit status depending on setting.