Ikegami IPD-DM11, Инструкция по эксплуатации

Страница: 19 / 36

14
button, and the screen at right shows up.
• SWITCHED LEVEL:
The brightness level for switching to the day or night mode can be preset.
The levels can be selected in the order of BRIGHT, MID and DARK.
②
COLOR: The color mode can be selected.
③
B/W: The Monochrome (B/W) mode can be selected.
(4) SENS UP
Selection of electronic sensitivity increase mode. Possible to choose
electronic sensitivity increase rate.
① OFF: Electronic sensitivity increase mode is OFF.
②
ON: Possible to set the maximum magnifi cation during operation of
electronic sensitivity increase.
• SLOW SHUTTER: x2, x4, x8, x16, x32
The higher the factor, the higher the sensitivity, but motions at
maximum factor look unnatural.
(5) LIGHT CONTROL
The backlight compensation and sensing
spot area modes can be selected. The
wide dynamic level and DC type iris lens
are adjusted.
Select LIGHT CONTROL on the main
menu screen. Press the SET button, and
the screen at right shows up.
① BACKLIGHT CMP.:
The backlight compensation modes
can be selected.
• ON: Normal backlight compensation
mode is in effect.
• 1SPOT: Select 1SPOT and press the
SET button, and the screen shown
at right appears. Highlight ADJUST
ZONE and press the SET button, and the BLC compensation
sensing area setting screen comes up.
Each time the SET button is pressed, the assigned area color
changes in turn Blue, Green and Red in this order.
• In case of Blue:
Using the UP, DOWN, LEFT or RIGHT button, the fi eld can be
moved wherever you like.
• In case of Green:
Using the UP, DOWN, LEFT or RIGHT button, the fi eld can be enlarged.
• In case of Red
LIGHT CONTROL
→BACKLIGHT COMP. OFF
W.DYNAMIC
IRIS LEVEL
LENS IRIS
DC
RET
1SPOT ZONE
→ADJUST ZONE↓
RET