Ikegami IPD-DM11, Инструкция по эксплуатации

Страница: 24 / 36

19
(4) PRIVACY MASK
Possible to set up to 8 privacy masks.
Move to the Privacy Mask item and press
the SET button to display screen to the
right.
* Note: If the camera ID is displayed
on the same line as the privacy
mask, the mask becomes
transparent. Set so that the
camera ID and mask do not overlap.
With this screen, make On or Off of the privacy masking and desired
color of masking with PAINT, in three colors, Grey, Black or White.
While the privacy masking ON and push
SET button, an individual setup screen
comes out.
With this screen, eight (8) different
individual masking can be set.
It is possible to press the SET button and
set the mask position and size for the
mask of the numbers set to ON.
●
Mask setting procedure
① Move the blue semitransparent cursor to the above left of the
location you wish to mask and press the SET button. (If other masks
are ON, the masks other than the one being set are displayed as
grey semitransparent).
② When the cursor changes to blue, use the UP, DOWN, RIGHT, LEFT
buttons to adjust the size.
Each button is for;
UP : Moves a mask bottom line to above (Shrink height)
DOWN : Moves a mask bottom line to below (Enlarge height)
RIGHT : Moves a mask bottom line to below (Enlarge height)
LEFT : Moves a mask bottom line to below (Enlarge height)
③
Press the SET button to display the mask section as blue
semitransparent.
If you want to change the mask position, push SET button and
change the screen to a translucent sky blue screen.
If you want to change the mask size, push SET button and change
the screen to a translucent blue screen.
When multiple mask displays are ON, each time the SET button is
pressed for a mask whose display is ON, the selection condition changes
in the following order (masks whose display is OFF are skipped).
PRIVACY MASK SETUP
→PRIVACY MASK OFF
PAINT GRAY
RET
ENABLE MASKS
→MASK 1 ON↓
MASK 2 ON↓
MASK 3 OFF
MASK 4 OFF
MASK 5 OFF
MASK 6 OFF
MASK 7 OFF
MASK 8 OFF
RET