Ikegami IPD-DM11, Инструкция по эксплуатации

Страница: 15 / 36

10
①
Lens fi xing screws (elevation)
These are screws to fi x the camera in the desired elevation position.
Fix these screws after setting the viewing position.
②
Vari-focal lens
Can be used with fl exible angle of view using varifocal lens.
③
FOCUS lever
Tighten the screw after focus adjustment.
④
ZOOM lever
Tighten the screw after image angle adjustment.
⑤ Power input terminal
Turn on the power DC12V (DC10.5V 〜 DC15V).
⑥ Network image output terminal
This is RJ-45 connector. Use a cable more than Cat 5e when using this
in PoE mode.
⑦
AUDIO input terminal
This is stereo mini jack.
⑧
DIGITAL IO terminal
This is digital IO terminal.
DIGITAL IN is no-voltage contact point.
DIGITAL OUT is open or short circuit status depending on setting.
⑨
Image output terminal for test monitor
⑩ RESET button
The network setting will be returned to default setting if this button is
pressed more than 10 seconds.