9
⑥
Ethernet connector (RJ45)
To be used with Ethernet 10Base-T/100Base-TX. For connection to other
devices, use a cable of category 5 or higher.
Used with PoE (IEEE 802.3af) CLASS 0.
LINK/ACT LEDs
LINK: Green light is lit when connection with other equipment has
been established.
ACT: Orange light blinks when sending/receiving data with other
devices.
⑦
FOCUS EZ function switch (also functions as setup function switch)
FOCUS EZ is a function that supports focus adjustment.
For details, see Section 7: FOCUS EZ Function.
⑧
Setup function switch
See Section 6: Setup
⑨
DC12V/AC24V Input Connector
Power source input connector when not supplying power from PoE.
Input a power source of DC10.5V - 15V or AC24V
±
10%
* This installation should be made by a qualified service person and should
conform to all local cades.
The thickness of the cable for connection is 0.2 - 1.0SQ (AWG24-18).
Remove about 7 mm.
⑩
Alarm input-output/day-night switching terminal block
Uses for remote control of alarm input/output or day/night switching.
For details, see Section 4-1: Terminal Block
⑪
SD card slot
For inserting SD card.
