8
①
Lens mount (CS mount)
This is used to mount the lens on the camera. Many types of CS mount lens
can be used.
C-mount adapter (optional) allows use of C-mount lens.
②
Camera mount
These holes (1/4”-20UNC) are used to install and fix the camera on the
camera mounting or bracket. Those can be also applicable to normal use
tripods which have a quarter inch thread. This mount, with two mounting
holes, can be re-positioned on either the bottom or the top of the camera as
required.
Note:
For screws to attach a tripod or camera holder, choose screws for which
the screwing length to the camera mount is 4.5-5.5 mm.
③
Lens control connector
Specifically used to connect the auto iris lens.
Connect the wires as shown below.
Please refer also to the instructions of the lens to be used.
1. Damping coil (-)
2. Damping coil (+)
3. Driving coil (+)
4. Driving coil (-)
④
VIDEO OUT (BNC)
Outputs analog image (NTSC) (terminate at 75 Ohms).
This BNC connector is an output of video signal for local testing or for
monitoring.
This is useful for camera setup and lens adjustment.
⑤
Power indicator
A green LED lights when power is being input to the camera. If the green
and orange light display is blinking, request maintenance or inspection.
3
2
1
4
3
2
1
4
Auto irls lens
Applicable connector
E4-191J-150
(Technical electron Co.Ltd.,)
or equivalent
