8-5.SD Status Report
Click SD Status Report item on Menu, below screen is displayed.
It can be sent the capacity information of SD card by E-mail, through this setting.
It is useful in case of selected Pause at full of setting 8-4.Recording Mode.
Disk Full Notification
Select Enable to use this function.
Periodic Notification
Select Enable if it is needed to receive the SD capacity information on
selected Day of week and Time.
Day & Time
Set the Day of week and Time to receive the Notification by email.
SD Error Notification
Select Enable if it is needed to receive Notification of SD Error.
SMTP Server
Enter IP address of SMTP server for email service.
Authentication Login
Select Enable if SMTP server requires ID and Password.
User ID
Enter User ID to login SMTP server.
Password
Enter Password to login SMPT server.
Sender
Enter the email address of the sender.
1st
～
3rd Recipient
Enter the recipient s email address up to 3 persons.
User Defined Message
Enter the contents of the message to add in the notification, if it is
needed.
After finished above setting, click Apply button to save.
If click Back button, new setting data will be cancelled and the screen will be back to previous
screen display.
60
