The video streaming for camera can be set as below example.
This example is explained based on camera default IP address 192.168.1.100.
Unicast Address
Primary Stream
rtsp://192.168.1.100/stream1
Secondary Stream
rtsp://192.168.1.100/stream2
Multicast Address
Primary Stream
rtsp://192.168.100/multicast_stream1
Secondary Stream
rtsp://192.168.100/multicast_stream2
5-9.SNMP
Click SNMP item on the Menu, below setup screen is displayed.
It can be monitored and configured the network status of connected network products. SNMP V1
and V2 are supported over MIB2(Management Information Base),but few functions are not
supported.
SNMP V1/V2
Enable:Start SNMP service
Disable:Stop SNMP service
Trap
Enable:Start SNMP Trap service
Disable:Stop SNMP Trap service.
Destination
IP Address
Set the IP address for product to receive SNMP Trap message.
Trap Community
Key value used in SNMP Trap e.g.) public
Available Traps
Cold Start:When SNMP start.
Authentication Failure:When key value of SNMP query is wrong.
After finished above setup, click Apply button to save settings.
If click Back button, new setting data will be cancelled and the screen will be back to previous
screen.
25
