IKA C 6030, Руководство по эксплуатации

Страница: 7 / 20

7
Unpacking
• Unpacking
­ Please unpack the device carefully
­ In the case of any damage a report must be sent immediately
(post, rail or forwarder).
• Delivery quantity
a) Base plate
b) Gas washing bottle
c) GL screw joint
d) Pressure tubing
e) Drainage hose
f) Venting head
g) Fork spanner
h) Set of O­Rings
i) Operating instructions
The C 6030 venting station is used for controlled venting
of
IKA
®
decomposition vessels C 6010 and C 6012 in
conjunction with the IKA ® C 6000 calorimeter system in
the "decomposition" operating mode.
The venting speed may be infinitely adjusted via a throttle valve by using a
manual adjusting screw. Please note that the throttle valve is
closed at the
beginning of the venting operation.
Do not operate without the ground clamp included in the delivery quantity!
The maximum permitted operating pressure is 40 bar (at the vent header (f) ).
Please observe the general laboratory guidelines when handling glass vessels.
DANGER
Furthermore, toxic combustion residue in the form of gases, ashes or condensation,
for example, is possible in the inner wall of the washing bottle.
Observe the accident prevention requirements applicable to
the activity and the work station.
Wear your personal protective equipment.
When handling combustion samples, combustion residue and auxiliary materials,
please observe the relevant safety regulations. The following materials, for
example, could pose a risk:
­ corrosive
­ highly flammable
­ explosive
­ bacteriologically contaminated
­ toxic
Combustion gases are hazardous to health, there-
fore the venting hose must be connected to a suitab-
le gas cleaning system or extraction system.
DANGER
DANGER
c
e
}
a
b
c
d
f
e