11
SETTING AND USING THE SLEEP TIMERS
(Continued)
Press the
Sleep Button
during sleep to set sleep to review sleep time
remaining. Press again to go to next (lower) sleep duration. During sleep
mode, any current light therapy sound levels and/or light therapy
brightness levels will gradually be lowered to off.
After setting the sleep timer, your settings will be saved for later use. At
any time simply press the Sleep button to enter directly into that sleep
preset.
* Note: the unit will silence the audio but will NOT turn off your Aux device.
B L U E T O O T H
PAIRING
Pairing establishes a unique communication connection between the unit and your
Bluetooth device. Once paired, you will be able to stream audio wirelessly to the
iZBT20 and control features using the iHome Zenergy™ app.
1. Turn on your Bluetooth device and make it
“discoverable” by turning on Bluetooth mode (check
in Options or Settings).
2. Press and release the
Power Button
to turn on the
iZBT20 in Bluetooth (PHONE) mode.
The first time
the unit is turned on it will enter auto pairing mode
:
voice prompts will announce “pairing” and PAIR and
the BT icon will flash on the display while the unit
attempts to pair. “
iHome
iZBT20” should appear on
your device’s menu. Select “iHome iZBT20” on device
to begin/complete pairing. If your device asks for a
password, enter 1234 on the keyboard of your device.
A voice prompt will announce “Bluetooth connected”.
If no device is paired within 3 minutes, the unit will
revert to its previous state.
iHome iZBT20
NOTE:
Pairing to “iHome iZBT20” connects the unit to your Bluetooth device to play
music. The “iHome iZBT20 app” name is related to the Zenergy app. Download and
pair to this to extend and enhance iZBT20 operating options.
(
Continued on page 11
)
