iHome zenergy iZBT20, Руководство пользователя

Страница: 8 / 21

7
S E T T I N G A N D U S I N G T H E A L A R M S
You can easily set your alarms using the iHome Zenergy™ app.
SETTING THE ALARM FROM THE UNIT
This unit has two alarms which are set the same way. Instructions below are for
setting alarm 1. Substitute the Alarm 2 Button to set alarm 2. You can wake to
your Phone (Bluetooth), FM radio or to the built-in buzzer alarm. You can also
set snooze preferences, pre-alarm tones and tone preferences, pre-alarm light
and light preferences. The alarm will sound for 60 minutes or until reset/turned
off.
1. Press and hold the
Alarm Button until the alarm time display flashes and
one beep sounds. Press the
+
or
– Buttons
to adjust the display to the
desired alarm time (hold for rapid adjustment). Remember to set the
correct AM or PM alarm time.
2. Press the
Alarm Button
to confirm the alarm time. The wake to schedule
will flash. Press the
+
or
– Buttons
to set the desired alarm schedule: 7 Days
(every day), 5 Days (week days) or 2 Days (weekends only).
3. Press the
Alarm Button
to confirm the alarm schedule. The WAKE-TO
indicator will flash on the display. Press the
+
or
– Buttons
to select PHONE
(Bluetooth), RADIO or BUZZER, then press the
Alarm Button
to access
volume setting for the selected alarm source.
Wake to Phone: If wake to Phone (BT) is selected, press the + or – Buttons
to set the BT volume (can be set from 5–40). The alarm will
wake you to the last track played on your Bluetooth device.
Wake to Radio: If wake to radio (FM) is selected, press the + or – Buttons to
select a radio station to wake to, or press the Play/Pause
Presets Button as needed to select a preset station (see
Memorizing Radio presets on page 13 for details on setting
presets
). Confirm your selection by pressing the Alarm
Button . Press the + or – Buttons to set the FM radio alarm
volume (can be set from 5–40).
Wake to Buzzer: Select to wake to buzzer alarm.
( Continued on page 8 )