Introduction
Battery Installation
Battery Installation
Battery life varies due to a variety of factors, including temperature and back-light usage.
While changing batteries, an internal lithium battery will retain saved data.
1. Access battery compartment by turning the battery-cover screw counterclockwise.
2. Lift up on the cover by using fingernail to break airtight seal.
3. Observing correct polarity (+) and (-), insert two (2) 1.5V AA alkaline or rechargeable batteries.
4. Replace cover.
5. Turn battery-cover screw clockwise until tight (do not over-tighten).
For optimal performance, we recommend using high capacity alkaline batteries as recommended for digital cameras and
portable CD players. If using rechargeable batteries, we recommend Ni-MH rechargeable batteries with a power rating
of 1700mA or higher. Lithium batteries are recommended for use in cold temperatures.
WARNING:
•
DO NOT MIX alkaline and rechargeable batteries
•
REMOVE batteries from GPS Caddie when connected to data/power cord
•
REMOVE batteries from GPS Caddie during extended periods of non-use
•
DAMAGE to person or property caused by improper use of batteries is not covered under warranty
(Manufacturer is not liable for any injuries caused while using this product)
•
CHECK with battery manufacturer regarding specific warranty and proper disposal
information
7
Introduction
GPS Caddie Features
6
Large display
Secure battery
compartment
USB synchronization
3-button operation
Easy-grip sides
Removable belt clip
Water-resistant
construction
