10
➢
Manual handling of products may present a risk of injury. You are advised to assess the
risks taking into account the task, the individual, the load and the working environment.
➢
Before starting work ensure that you have suitable tools and/or consumables available.
Use only genuine IGEMA replacement parts.
➢
Do not remove the nameplate attached to the equipment. Serial number and other useful
information are stamped on it.
➢
This unit must not be used for oxygen applications, it has been specially designed for the
use specified here.
➢
During the assembly work, apply protective measures against dirt.
➢
Correct installation of the equipment is full responsibility of the contractor.
➢
Sample coolers are designed to be applied in places protected from exposure to weather.
➢
We recommend special constructions or protective measures for applications on the
outside or in adverse environments like corrosion-promoting conditions (sea water,
chemical vapours, etc).
4. Transport and Storage
4.1 Safety instruction
➢
Handling and lifting of materials should be made with adequate equipment.
➢
The sample coolers and equipment should be protected from impacts and forces during
transportation and storage.
➢
The manufacturer doesn’t assume the responsibility of damaged equipment due to
inappropriate handling during the transportation and storage.
Danger
