COPY FROM 01
COPY FROM 01
COPY FROM C01
TO RANGE C02 TO CO2
TO RANGE C02 TO CO2
TO RANGE C03 TO CO7
Copy Alarm Setup Command
Select the COPY CHANNEL SETUP if you want to copy the complete channel setup from one channel
to multiple others. This can be used to speed setup where there are many sensors/channels that are to
have the same detector inputs set and scaled. Each channel can then have any minor amendments
made after copying the majority of the setup thus speeding up the setting up process of the control
panel.
1
2
2
Select the COPY CHANNEL SETUP menu
item and the following setup screen is
displayed.
Note the COPY FROM channel number is
flashing. This is the channel who’s setup you
wish to copy to other channels. Rotate the jog
wheel if you wish to select a different channel
to be copied from. Once the selection is
correct press the jog wheel
The first of the copy to channel numbers is
now flashing. Again rotate the jog wheel until
the first channel number in the range you
wish to copy to is displayed. Press the jog
wheel when the first channel in the range to
copy to is indicated.
The second of the copy to channel numbers
is now flashing. Again rotate the jog wheel
until the last channel number in the range you
wish to copy to is displayed. Press the jog
wheel when the last channel in the range to
copy to is indicated.
In this example the channel setup from
channel one will be copied to channels three
through seven.
Page 35 of 52
