iGage X90-OPUS, Руководство пользователя

Страница: 28 / 56

28
several small junk files will be created that don't have any
meaningful data and are of no value.
The download tool will automatically ignore files smaller
than this minimum value. This keeps useless files from
cluttering your computer.
‘Show UTC Time’
When unchecked (the default,) the download tool will show
the observation start and end times in your local time zone.
If you check 'Show UTC Time', then the times are displayed
in UTC time.
'Default HI'
When you download an occupation from the receiver, this
HI will be the default associated with every occupation. You
can change the HI for each individual occupation later, this is
just the default.
If you ALWAYS use a 2-meter range pole, then this value will
always be 2.000 and you won't have to worry about HI
blunders.
FEET: If you measure up in feet, you can enter the height in
decimal feet and put an 'F' after the measurement. The
program will automatically convert to Meters for you.
SLANT HEIGHT in Meters: If you measure a slant height,
enter an ‘S’ after the measurement and the program will
compute the vertical height for you.
SLANT HEIGHT in FEET: If you measure a slant height in feet,
enter ‘SF’ or ‘FS’ after the measurement and the program
will compute the vertical height in Meters for you.
Note: if you use the ‘PPP Service’ = ‘RTX (CenterPoint)’ the
submitted RINEX file spoofs a ‘UNKNOWN EXT NONE’ and
adjusts your actual HI to reflect the generic antenna L1
offset.