iGage X90-OPUS, Руководство пользователя

Страница: 21 / 56

21
You should select each occupation and either delete it:
<- the ‘Delete Occupation’ button
(if it is a short errant occupation) or enter the values you
recorded in your field book:
1. PID (Point ID) A unique short identifier for each
marker (usually a 4 digit integer.) Only letters,
numbers and the underscore are allowed in the
PID.
2. Description A longer description of the point.
Note that quotes “ and ‘ are not allowed in the
description.
3. HI The Instrument Height which is the distance
from the ground mark to the bottom of the
receiver
add ‘F’ to enter feet
add ‘S’ to enter slant height
add ‘SF’ or ‘FS’ to enter slant feet height
4. Operator This value gets placed in exported RINEX
files
5. Agency This value gets placed in exported RINEX
files
If the ‘_New’ folder gets too full, you can make a new
project folder (with the “+” button) and move occupations
to the project:
Submitting an Occupation to OPUS
Once all of the new occupations have been deleted or
assigned to a project you can submit an occupation to NGS
OPUS, NGS OPUS-RS, RTX, AUSPOS. IBGE or post-process
them using other software / services.
Click on an occupation to select it: