19
The X90-OPUS receiver mounts just like a USB thumb drive
(flash drive) on your Windows computer. No special drivers
are required.
To download data from your receiver:
1.
Turn on the GPS receiver
2.
Wait 10 seconds for the power LED (Red) to blink
3 times.
3.
Plug the USB connector into a port on your
computer
4.
Wait for the Windows disk mount screen to
appear
When/if you see this ‘AutoPlay’ dialog, close it by clicking on
the red ‘X’ in the upper-right corner.
The first time you attach an X90-OPUS receiver, you may
need to wait up to 2-minutes for standard device drivers to
be downloaded / installed.
The drivers are built into Windows XP, Windows Vista,
Windows 7 and Windows 8. The drivers are not distributed
with the GPS receiver.
If your X90-OPUS receiver does not mount or an error
message is displayed, you can usually unplug the receiver,
wait a moment and plug it back in.
If you continue to have problems check the
‘Troubleshooting…’ section at the end of this manual.
Содержание X90-OPUS
Страница 1: ......
Страница 2: ...2 X90 OPUS Static GPS Receiver User Manual Revision I 2014 05 27D B9165...
