iGage X90-OPUS, Руководство пользователя

Страница: 15 / 56

15
LED Indicators
There are four LED indicators on the X90-OPUS:
Power (Red)
Power ON. If flashing, the battery charge is low.
SV’s (Satellite Count) (Blue)
Blinks once for each tracked satellite, waits 5-
seconds, repeats.
Serial (Green)
Blinks when data is received by the serial port.
Blinks when the ‘Record’ button is pressed if the
receiver is storing to a static file.
Files (Yellow)
Blinks each time data is stored to the static file.
When the X90-OPUS turns on:
All LEDs will flash
The Blue SV’s LED will flash three times, then after 1-
second, once more
After the Blue SV’s LED flashes three times, the receiver will
automatically begin searching for satellites. When enough
satellites are found to determine the receiver position and
current date/time, a new occupation file is opened and the
yellow Files LED will begin to flash, once each epoch (the
default epoch is 5-seconds.)
NOTE: If the receiver is deployed after not being used for
more than a month, or was last turned on more than a
couple hundred miles from the current location, it may
take an extra few minutes for the receiver to obtain a
position.
After the Blue SV’s LED flashes three-times, you may plug
the receiver into your PC and it will mount as a fixed drive.