IFM OY95 S Series, Оригинальная инструкция по эксплуатации

Страница: 30 / 33

30
13.2 System error
Display Possible cause Troubleshooting
6 Short circuit Check connections at terminals 1
and 3 (OSSD).
0 Overload static OSSD outputs Check current through OSSD
outputs, reduce load to max. 500
mA (2.2 µF).
1 Interfering transmitter detected Find interfering transmitter and take
one of the following measures:
-Exchange position of transmitter
and receiver.
-Change location of the
interfering transmitter so that the
receiver is not influenced.
-Screen the beams coming from
the interfering transmitter using
a mat protective device.
13.3 System failure
In case of a system failure an "F" is displayed alternating with an error code.
Display Possible cause Troubleshooting
3 Internal fault (main board)
Send device to ifm branch office
for repair.
4 Internal fault (main board)
5 Fault static OSSD outputs
A Internal fault (analogue basic
input)
H Configuration change by user
without system restart
Restart system.