Dimensions
Mounting
In order to expose the module to the minimum mechanical stress it should prefer-
ably be mounted horizontally or vertically on the mounting panel. The module
must be fixed with four screws to DIN 7500 or DIN 7984 (M5 x L).
If possible, the output module should be mounted in such a way that the cable
entry of the plug points downwards.
As the self-heating of the electronics of the unit is dissipated via the housing, suf-
ficient cooling must be ensured in case of "sandwich mounting" of modules.
Electrical connection
To guarantee the electrical interference protection of the module,
the housing must be connected to GND.
(e.g. to the ground of the vehicle)
To protect the whole system (wiring and output module) the individual electric cir-
cuits must be protected with max. 16 A.
ENGLISH
INPUT
/
OUTPUT MODULE
CR2513
PAGE
29
132
5,5
26
80
15
45°
153
LED
43
±0,5
±1
106,5
±1
Designation
Pin No.
Potential
Operating voltage
23
+VBB
S
Ground
01
GND
S
Operating voltage outputs
05
+VBB
O
CAN interface
14 / 51
CAN_H
32 / 50
CAN_L
15 / 33
CAN_GND