User manual
DUM1017795-EN
21
CHAdeMO mode
Once the CHAdeMO mode selected, the charger performs an internal check and initialization.
The LEDs ❹, ❺, ❻ and ❼ flashes simultaneously during the initialization phase.
Please wait for a few seconds.
Initialization...
→
The LED “CHARGER READY” ❹ flashes.
Connect the vehicle and
press the GREEN button
to start
9
In the event of an error, the charger will display one of the two messages below
Pwr module failure
0 OK and 2 Fail
or
No power module
Starting a charge in CHAdeMO
Connect the charging cable to the vehicle (secure firmly).
Press the “START” button ❶
→
The LED “CHARGER READY” ❹ flashes.
The charger starts to communicate with the vehicle.
STARTING SEQUENCE
STARTING COMMUNICATION
Communication has been established.
LOCKING CONNECTOR
