IEMCA KID 80-IV Touch, Руководство по эксплуатации и техническому обслуживанию

Страница: 18 / 92

EN
2 - TECHNICAL INFORMATION KID 80 IV
2 - Pag. 4 / 18
2.2 OPERATING CYCLE
The possible working cycles are listed hereunder:
- REGULAR CYCLE; the bar is fed by the bar feeder until it reaches the lathe “bar stop”.
- FIXED-PIECE FEEDING; the bar feeding is exact and accurate (no lathe bar stop is needed).
In the following sections you will find a concise description of the phases in this working cycle.
INFORMATION:
for further detailed information about working cycle selection and setting,
please see the keyboard instruction manual, in particular parameter 29.
2.2.1 REGULAR CYCLE
- At the stop of the lathe working cycle, the bar
pusher (A) moves to the back limit stop position.
- The bar pusher (A) and the "bar drop control"
unit (B) are lifted. At the same time, also the “bar
selecting” unit (C) that loads the first bar on the
"bar drop control" unit is lifted.