IEMCA KID 80-IV Touch, Руководство по эксплуатации и техническому обслуживанию

Страница: 17 / 92

2 - TECHNICAL INFORMATION KID 80 IV
EN
2 - Pag. 3 / 18
2.1.1 MAIN PARTS
A Magazine; contains the bars to be loaded.
B Bar selecting device; it takes the first bar out of the magazine and lays it on the "bar drop
control device".
C Bar limit stop device; it regulates correctly the position of the first bar inside the magazine,
before it is lifted by the bar selecting device.
D Bar drop control device; puts the bar onto the guide.
E Guide channel; this device drives the bar and introduces it correctly into the lathe.
F Carriage unit; this device introduces the bar into the lathe.
G Bar pushing unit; this device pushes the bar inside the lathe until it has been completely
machined.
H Flag device; this device is activated by the arrival of the bar fore end.
L Bar feeding motor; thanks to a toothed belt, motions are transmitted to the carriage and to
the bar pusher.
M Cam drive unit; it starts the cams of the bar selecting and bar drop control devices as well
as the bar limit stop cams.
N Side keyboard; thanks to this keyboard it is possible to set up programming and to start bar
feeder working phases.
P Electric cabinet; houses the electrical control panel.
Q Remote control; this device allows the operator to control operations remotely in manual
mode.