IEMCA KID 70 Скачать руководство пользователя

Страница: 60 / 85

6 - USE AND OPERATION

KID 70

6 - Pag. 2 / 14

6.1

PRELIMINARY NOTE ON USE AND OPERATION

INFORMATION:

the incidence of injuries cased by the use of machines, depends on many factors

that cannot always be prevented and checked. Some accidents can depend on

some unpreventable environmental factors, others can be especially due to the

operators' behaviours. The operators, apart from being authorised and

appropriately informed, at the first use will have to carry out some manoeuvres

to test the controls and the main functions. Exclusively use the machine

according to the instructions provided by the manufacturer and do not tamper

with any devices to obtain different performances. Before use, make sure that

the safety devices are perfectly installed and efficient. The users, besides

satisfying the above-mentioned requirements, must enforce all safety

regulations and carefully read the control description and the commissioning.

Содержание KID 70






















































































Результаты поиска

Содержание KID 70

Отзывы:

Похожие инструкции для KID 70

Бренды по названию

Популярные бренды

IEMCA KID 70, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание KID 70

Отзывы:

Похожие инструкции для KID 70

Бренды по названию

Популярные бренды