IEM eConnect, Инструкция по использованию

Страница: 10 / 26

Installation and initial operation
38
4.2 Setting up
WARNING!
Risk of injury by the PSU cable!
▪
Set up the eConnect so that there is no risk of
injury from a PSU cable lying around!
1) Select a suitable installation location for the
eConnect , ideally near a window.
2) Alternatively, set up the eConnect at a location
at which your mobile telephone has good
reception.
3) Select an installation location at which the
eConnect is not exposed to any strong electric
fields.
4) Keep moisture away from the eConnect .
5) Set up the eConnect so that it can be isolated
from the mains and power supply voltage at any
time.
4.3 Installation and preparation for use
WARNING!
Danger presented by improper preparation for use
▪
The eConnect must not be operated directly
adjacently to other devices or stacked on top of
each other, as doing so may result in
malfunction! However, if it becomes necessary
to operate the device in the manner described
above, this device and the other devices should
be monitored to ensure that they are functioning
correctly.
WARNING!
Danger presented by improper preparation for use
▪
Keep the eConnect at least 30 cm (12 inches)
away from other devices that emit radio waves
(e.g. mobile telephones).
▪
Portable HF communication devices (radios,
including accessories thereof such as antenna
cables and external antennas) should not be
used within a range of 30 cm (12 inches) of the
eConnect’s
parts and cables as identified by
the manufacturer. Failure to comply with this
may result in impairment of the device’s
performance.