IEM eConnect, Инструкция по использованию

Страница: 12 / 26

Operation
40
The following information is indicated by the relevant
LED:
LED Colour Status information
BT
Yellow,
flashing Initialisation when
started
Blue
Bluetooth
®
connection/
data transmission
Yellow Warning
Red
Error in Bluetooth
®
module
Mobile
communic
ations
network
Yellow,
flashing Initialisation when
started
Green
Mobile connection/
data transmission
Yellow Warning
Red
Error in mobile
communication module
System
Yellow,
flashing Initialisation when
started
Green
System ready for
operation
Yellow Warning
Red Error
5.2 Transferring the measurement values
The eConnect
is functional as soon as the “
System
”
LED lights up green.
The regular data transmission procedure from the
measuring device to the
eConnect and the process of
forwarding data from there is as follows:
1)
Check whether the “
System
” LED on the
eConnect is lit green.
2) Start a measurement with your measuring
device.
3) After the measurement, a Bluetooth
®
connection
between the measuring device and the
eConnect is established.
4) The " BT
” LED on the
eConnect is lit blue.
5) The measurement data is transferred from the
measuring device to the
eConnect .
6) The eConnect establishes a connection to the
mobile communication network.
7)
The “
Mobile communication
” LED lights up
green.
8) Your measurement data is being transferred to
the external database by the
eConnect .
9)
After data transmission, the “
BT
” and “
Mobile
communication
” LEDs go out.