Care and maintenance
45
EN
7
Care and maintenance
WARNING!
Risk of damage from water penetration!
▪
Switch the device off and disconnect the power
supply unit.
Only clean the
eConnect
when it is switched off. To do
this, remove the power supply unit. Liquid must not
penetrate the device. If liquids do happen to enter the
eConnect
, contact your retailer or the manufacturer
without delay.
Use a damp cotton cloth to wipe off the
eConnect
as
necessary. Dampen the cotton cloth with lukewarm
water only, possibly adding a mild detergent. Never use
chemical solvents or detergents, as these can damage
the surface of the
eConnect
.
The
eConnect
and the power supply unit should be
submitted for a safety inspection at least every two
years. In this case, disconnect the
eConnect
from the
power source to safely shut it down. Send the device
with the power supply unit back to the manufacturer in
the original packaging.
8
Disposal
NOTE!
Environmental damage if disposed of incorrectly!
▪
Electrical scrap and electronic components have
to be treated as hazardous waste.
The
symbol on the product or packaging means
that this product should not be treated as normal
domestic waste, but has to be passed to a recycling
point for electric and electronic devices.
You can find out more about this from your local
authority, the communal disposal companies or the
shop in which you bought the product.
Содержание eConnect
Страница 1: ...Instructions to Use EN ...
