IEI Technology WSB-9152 Скачать руководство пользователя страница 249

Страница: 249 / 258

WSB-9152 PICMG 1.0 SBC

Page 229

G.1 Hazardous Materials Disclosure Table for IPB Products

Certified as RoHS Compliant Under 2002/95/EC Without
Mercury

The details provided in this appendix are to ensure that the product is compliant with the

Peoples Republic of China (China) RoHS standards. The table below acknowledges the

presences of small quantities of certain materials in the product, and is applicable to China

RoHS only.

A label will be placed on each product to indicate the estimated “Environmentally Friendly

Use Period” (EFUP). This is an estimate of the number of years that these substances

would “not leak out or undergo abrupt change.” This product may contain replaceable

sub-assemblies/components which have a shorter EFUP such as batteries and lamps.

These components will be separately marked.

Please refer to the table on the next page.

Содержание WSB-9152



































































































































































































































































Результаты поиска

Содержание WSB-9152

Отзывы:

IEI Technology WSB-9152, Руководство пользователя, Страница: 249 / 258

Результаты поиска

Содержание WSB-9152

Отзывы: