IEI Technology WSB-9152 Скачать руководство пользователя страница 172

Страница: 172 / 258

WSB-9152 PICMG 1.0 SBC

Page 152

CAUTION!

Do not accidentally disconnect the SATA drive cables. Carefully route

the cables within the chassis to avoid system down time.

7.2 Features and Benefits

Supports RAID levels 0, 1, and JBOD

Supports connectivity to two disk drives

Supported Operating Systems include: Windows 2000, Windows XP, Fedora

and Red Hat Linux

Graphical software for RAID management in Windows

7.3 Accessing the JMicron RAID Utility

To access the

JMicron RAID Utility

, please follow the steps below:

Step 1:

Connect two SATA drives to the system. Ideally the two drives should be

identical, but two non-identical drives will work too.

NOTE:

Make sure the SATA drives are EXACTLY the same when they are

configured in a RAID configuration (JBOD, RAID 0 or RAID 1). If they

are not the same size, disk drive capacity is sacrificed and overall

performance affected.

Step 2:

Enable SATA drives in BIOS

. Access the

AMI BIOS

setup program. Open the

Advanced CMOS Setup

menu. Go to the IDE configuration menu. Set “Sec,

SATA controller mode” to [RAID]. To enable the system to boot from the SATA

drives, go to the BOOT menu and set “Boot from SATA function” to [ENABLED].

Step 3:

Save and Exit the BIOS

Содержание WSB-9152



































































































































































































































































Результаты поиска

Содержание WSB-9152

Отзывы:

IEI Technology WSB-9152, Руководство пользователя, Страница: 172 / 258

Результаты поиска

Содержание WSB-9152

Отзывы: